Wonderful DIY Hammock Type Baby Swing

What kid doesn’t love a swing? A baby swings not only provides a gentle rocking motion to soothe and comfort baby , but also give moms hands-free time.

A few years ago, I often used a baby swing to rock my baby to sleep , get rest and peace . Both of us enjoyed it .I remember one of my friends sent a baby swing to us after my daughter was born , that’s my first one . My daughter slept very quickly on it with rocking slowly . However, it did suit us no longer because my daughter growing up , so we have to go to the park for swinging . I have never thought I can make my own swing until I saw this idea today .This project looks very easy to make.

What you will need:

1 inch oak dowels
25 ft nylon/poly blend braided 5/16″ rope
Steel rings
steel carabiner
rope crimps
about 1 yard of outdoor canvas
Some tools: sewing machine, hammer, pliers, saw, drill press
Sturdy tree branch

 

Supplies :

1 inch oak dowels
25 ft nylon/poly blend braided 5/16″ rope
Steel rings
steel carabiner
rope crimps
about 1 yard of outdoor canvas
Some tools: sewing machine, hammer, pliers, saw, drill press
Sturdy tree branch (still attached to the tree, thank you.)

I started by making the seat. I found this beautiful striped canvas at a fabric outlet, and I love it! I think I will start sewing exclusively with stripes, it’s super easy to measure stuff… just FYI.

I cut the large piece 36″x14″, the top piece is 14″x11″, and the bottom leg piece is 6″x11″. (I cut all my pieces from the same long strip that started 60″x14″) The way they are laid out in this picture is the shape we are creating for the seat part of the swing.
The first step was to hem the sides of the two vertical pieces. You will be hemming the 11″ sides. Here’s how I did the hem for this project:

1. Iron over a 1/4 inch to wrong side.
2. Iron over another 1/2 inch to wrong side.
3. Sew two straight seams 1/8 inch from each side of the hem. You have a lovely finished edge, the double seam isn’t necessary, but I think it looks really nice.

Next you are going to attach those two pieces to the long horizontal piece. Here’s how I attached them and double enforced the seams so they would be extra safe for my little boy…

 1. I ironed over 1/4 inch then another 1/2 inch just like i did in the first two steps above. Then I measured and centered the vertical pieces and pinned them, wrong sides together, just underneath that ironed down hem.
2. Sew two seams, just as you did in part 3 above.
3. Now flip the vertical piece up over the hem you just created, and iron it flat.
4. Top stitch over the two seams you created previously, securing the vertical piece in that position and reinforcing your seams.

(note: for smaller children you may want to also sew a cushion or pillow to go behind their back. I made a 12×12″ square pillow out of coordinating outdoor canvas to go behind Sam, it was the perfect size.)

Next you create the frame and ropes to hang the swing.
I used 1 inch oak dowels, and cut them to 16″. My dad took them to his fancy shop and used fancy tools to put beautiful radius on each end, but that is not structurally important. You can just cut and sand the ends really well so no one gets splinters.

Next you will put a 3/8″ hole 1″ from  both ends of each dowel. You will want you use a drill press to get the holes exactly straight. You can stain your dowels at this point, if you so desire.

Okay, time for the ropework! I cut 2 lengths of rope (I used a braided nylon/poly blend that was 5/16″) 10 feet. You need to use a lighter to melt the ends of the rope so it doesn’t fray. Then find the center of the two ropes and thread them through your steel ring and pull it to the center. (When you purchase your ring, make sure it is weight bearing. Though it will never need to hold that much, ALL the materials I used for this project were rated to hold up to 200 lbs. Safety first!)

Then I used a metal rope clamp to bind the four ropes together. You can see an unused one sitting above the ropes, and I have only hammered two of the four prongs onto the rope. (just wanted you to see how this works.)

The completed clamped rope looks like this.The rope clamp is another important safety feature in this swing, without it, the ropes could slide freely through the ring and topple the swing and the little one inside. So be sure to include that!

Now it’s time for the fun part… assembly! I was literally dancing about the house by the time it got to assembly. I was SO EXCITED to complete this project and get it up in a tree and a baby in it! So here’s how you do it…
Thread your dowels through all four casings in the fabric seat. The front and back dowels will be below the side dowels.

Thread the rope through the holes of two crossed dowels, and create a stopper knot leaving a 2 inch tail of rope. (A simple overhand knot would likely be sufficient, but the stopper knot is a little more sturdy, and I didn’t want ANY chance of those knots slipping out when holding my precious and breakable baby) (By the way… I did a ton of research before doing this project and learned a lot about knots and what kinds are appropriate for securing or bearing what kinds of loads… Anyway, I kinda feel like I earned my boyscout badge in knots. Is there even such a thing?)

Oh my gosh! You have a swing! Now you need a safe place to hang it from.  Pick a sturdy branch or beam. This little picture is from the original website where I copied my swing design from… an excellent and informative graphic so I will save my breath… (fingers?)

make sure your carabiner is a weight bearing one. ours was purchased from the hardware store and rated to hold 200 lbs. Check the rating on any hardware you use–for your child’s safety!

You might also like this rocking chair cradle with a crib, This versatile furniture helps the mother to monitor her baby’s sleep while comfortably sitting in a rocking chair. When baby outgrows the cradle, it can be reconstructed and used as a rocking chair.